Click to enlarge

Air/Nitrogen/Oxygen Differential Pressure Sensor XGZP6810D

Wide Ranges: ±500Pa/±125Pa
3.0V～5.5V Power Supply
Differential Pressure Type
Air or Nitrogen, Oxygen(non-condensing)
I2C Interface
Temp. Compensated: 0℃～+50℃
Excellent repeatability, extremely low drift
Affordable Cost, Easy-to-use

Description
SAFETY NOTES & WARRANTY

Description

ESSENTIAL DETAILS


Manufacturer	CFSensor
Product Category	Pressure Sensor
Series	XGZP6810D
Model Number	As Order Guide
Pressure Range	±500Pa/±125Pa
Pressure Type	Differential
Power Supply	3.0V～5.5V
Output Type	I2C interface
Output	24 bit
Accuracy	±2.5%(customizable)
Measured Media	Air or Nitrogen, Oxygen(non-condensing)
Temp. Compensated	0℃～+50℃
Operating Temp	-20~65°C

APPLICATIONS

Medical&Healthcare(such like respiratory machine, CPAP)
Industrial&Automation(such like HVAC)
Domestic Appliance(such like Gas boilers)
New energy (fuel cells, heat recovery systems)
Fire Residual Pressure Monitoring

INTRODUCTION

The XGZP6810D pressure sensor is CFSensor’s series of differential pressure sensors designed for high-volume applications with an affordable cost and perfect performance. The pressure is measured by a thermal sensor element using flow-through technology. The XGZP6810D provide ±500 Pa and ±125 Pa pressure range for measuring air and non-aggressive gases with high accuracy and extremely low offset drift

XGZP6810D is a prefect silicon pressure sensor offering a ratiometric digital data(I2C interface) for reading differential pressure over the specified full scale pressure span.

The XGZP6810D is fully calibrated and temperature compensated for specified span, so XGZP6899D pressure sensor satisfy the perfect accuracy, which is designed for a wide range of application in medical care&health, home appliances, industry, air flow measurement, loT and other pneumatic devices/meters etc by utilizing a microcontroller or microprocessor with I2C interface.

DIMENSION (Unit:mm Unspecified Tolerances:±0.1mm)

6810D. DIMENSION

ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

6810D ORDER GUIDE

More information about pressure sensor XGZP6810D, refer to Datasheet or contact CFSensor

XGZP6810D Pressure Sensor V1.1.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.