Click to enlarge

Differential Pressure Sensor XGZP6895A

Wide Ranges: -100kPa～0～2.5…700kPa(show in Pressure Range Example)
Differential Pressure Type
For Non-corrosive Gas or Air or Liquid
Optional 5V and 3.3V Voltage
Calibrated Amplified Analog Signal(Refer to XGZP6895D for I2C interface)
Temp. Compensated: 0℃～+60℃(32℉～+140℉)
Direct Application, Low Cost.

Description
SAFETY NOTES & WARRANTY

Description

DIFFERENTIAL PRESSURE SENSOR XGZP6895A ESSENTIAL DETAILS

MPX5010DP, MPX5050DP, MPX5100DP, MPX5500DP, MPX5700DP, MPX4250DP alternative parts: XGZP6895A


Manufacturer	CFSensor	NXP	NXP	NXP	NXP	NXP	NXP
Product Category	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor
Series	XGZP6895A	MPX5010	MPX5050	MPX5100	MPX5500	MPX5700	MPX4250
Model Number	As Order Guide	MPX5010DP	MPX5050DP	MPX5100DP	MPX5500DP	MPX5700DP	MPX4250DP
Pressure Range	-100kPa～0～2.5…700kPa	0KPa～10KPa	0KPa～50KPa	0KPa～100KPa	0KPa～500KPa	0KPa～700KPa	0KPa～250KPa
Pressure Type	Differential	Differential	Differential	Differential	Differential	Differential	Differential
Power Supply	4.75V ~ 5.25V	4.75V ~ 5.25V	4.75V ~ 5.25V	4.75V ~ 5.25V	4.75V ~ 5.25V	4.75V ~ 5.25V	4.85V ~ 5.35V
Output Type	Analog	Analog	Analog	Analog	Analog	Analog	Analog
Output	0.2 V ~ 4.7 V	0.2 V ~ 4.7 V	0.2 V ~ 4.7 V	0.2 V ~ 4.7 V	0.2 V ~ 4.7 V	0.2 V ~ 4.7 V	0.2 V ~ 4.9 V
Accuracy	±2.5%	±5%	±2.5%	±2.5%	±2.5%	±2.5%	±1.4%
Measured Media	Air or Non-corrosive Gas or Liquid
Temp. Compensated	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Operating Temp	-30~100°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C
Package	Tray	Tray	Tray	Tray	Tray	Tray	Tray

APPLICATIONS

Medical&Healthcare
Industrial&Automation
Domestic Appliance
Consumer Electronic
Automotive Electronic

INTRODUCTION

XGZP6895A is a prefect silicon pressure sensor offering a ratiometric analog interface for reading differential pressure over the specified full scale pressure span and temp.range.

The XGZP6895A incorporates a silicon piezoresistive pressure sensor chip and an interior signal-conditional Application Specific Integrated Circuit(ASIC) in a SIP package with two air vents and long 6 PIN, which can be mounted freely from different direction.

The XGZP6895A is fully calibrated and temperature compensated for offset,sensitivity, temperature and non-linearity, so XGZP6895A pressure sensor satisfy the prefect repeatability,linearity, stability and sensibility, which can be applied directly in medical&healthy, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc.

XGZP6895A pressure sensor is for high volume application at an affordable cost and perfect performance.

Customized calibrations(working voltage,output voltage,and pressure range) are available.

DIMENSION (Unit:mm)

6895A DIMENSION

ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

6895A ORDER GUIDE

PRESSURE RANGE EXAMPLE

6895A PRESSURE RANGE

More information about differential pressure sensor XGZP6895A, refer to Datasheet or contact CFSensor

XGZP6895A Pressure Sensor V1.5.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.