Engine Oil Pressure Sensor XGZP6846A

  • Wide Ranges: 0kPa~100kPa…2000kPa
  • Absolute Pressure Type
  • Ceramic Package Structure
  • Silicon-gel Protection
  • Calibrated Amplified Analog Signal
  • Temp. Compensated:-20~85℃
  • Automotive Grade
Share on whatsapp
Share on email
Share on facebook
Share on twitter
Share on linkedin
Share on pinterest


Product CategoryPressure Sensor
Model NumberAs Order Guide
Pressure Range0kPa~100kPa…2000kPa
Pressure TypeAbsolute
Power Supply5V/3.3V
Output TypeAmplified Analog
Measured MediaAutomotive Oil Pressure
Compensation Temp0~60°C
Operating Temp-30~120°C



Engine Oil Pressure
The engine oil pressure sensor is an important device for detecting the oil pressure of the automobile engine. It detects the change of the oil pressure when the engine is running, and feeds it back to the ECU. If the oil pressure is insufficient and the oil cannot reach the lubricated parts, it will cause excessive wear and even overheating, which will damage the engine, so when the pressure detection value cannot reach the set value, the warning light will be lit.



XGZP6846A engine oil pressure sensor module is a new member of CFSensor automotive pressure sensor modules. It is a PCBA module specially developed for the automotive field. The SOP packaged MEMS pressure sensor chip and the signal processing circuit chip are respectively installed on both sides of the PCB board, and only the pressure chip is in contact with the measurement medium. The ASIC digitally compensate the offset, sensitivity, temperature drift and nonlinearity of the pressure-sensitive die, and use the power supply voltage as a reference to generate a calibrated, temperature-compensated standard voltage signal.

The internal pressure sensitive chip of the XGZP6846A engine oil pressure sensor module adopts a double gold wire process, and the surface of the chip and the gold wire is coated with soft silica gel, which can effectively improve the reliability and oil corrosion resistance.

XGZP6846A oil pressure sensor PCBA module supports comprehensive custom development, which is convenient for users to directly assemble into a sensor. The module shape and output can be customized according to user requirements. It is widely used in automotive electronic engine oil pressure detection.



engine oil pressure sensor xgzp6846a dimension

engine oil pressure sensor xgzp6846a dimension


ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

engine oil pressure sensor xgzp6846a order guide

Note: Custom requirement or parameter, please consult CFSensor for custom code(e.g custom pressure range etc.)



Please consult CFSensor whether required pressure range is under normal production before place order.

Notes: Unit conversion: 1000hPa=1000mbar≈750mmHg≈100kPa≈14.5PSI≈10mH2O≈1bar=0.1MPa;

engine oil pressure sensor xgzp6846a pressure range example


More information about engine oil pressure sensor XGZP6846A, refer to Datasheet or contact CFSensor

XGZP6846A Engine Oil Pressure Sensor Module V1.0.PDF



Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

  • The driving current and voltage should be used below the rated value.
  • Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
  • In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
  • Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
  • Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
  • If the sensor come with sharp PIN, please be careful not to hurt your body when using it.


The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.

Start typing to see products you are looking for.

Contact Us