Click to enlarge

Gauge Pressure Sensor XGZP6863A

Wide Ranges: -100kPa…0kPa…1000kPa(show in Pressure Range Example)
Gauge Pressure Type(Positive&Vacuum)
For Non-corrosive Gas or Air
Optional 5V and 3.3V Voltage
Calibrated Amplified Analog Signal(Refer to XGZP6863D for I2C interface)
Temp. Compensated: 0℃～+60℃(32℉～+140℉)
Horizontal Inlet for Space Saving.

Description
SAFETY NOTES & WARRANTY

Description

ESSENTIAL DETAILS


Manufacturer	CFSensor
Product Category	Pressure Sensor
Series	XGZP6863A
Model Number	As Order Guide
Pressure Range	-100kPa…0kPa…1000kPa
Pressure Type	Gauge
Power Supply	5V/3.3V
Output Type	Amplified Analog
Output	0.5~4.5V/0.2~2.7V
Accuracy	±2.5%(customizable)
Measured Media	Air or Non-corrosive Gas
Temp. Compensated	0℃～+60℃(32℉～+140℉)
Operating Temp	-30~100°C
Package	Plastic Tube

APPLICATIONS

Medical&Healthcare
Industrial&Automation
Domestic Appliance
Consumer Electronic
Automotive Electronic

INTRODUCTION

XGZP6863A is a perfect board mounted pressure sensor offering a ratio-metric analog interface for reading pressure over the specified full scale pressure span.

The XGZP6863A incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a SMT package.

The XGZP6863A is fully calibrated and temperature compensated for specified span, so XGZP6863A pressure sensor satisfy the perfect accuracy, which is designed for a wide range of applications in medical care&health, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc by utilizing a microcontroller or microprocessor with A/D inputs.

XGZP6863A pressure sensor is for high volume application at an affordable cost and perfect performance, especially for space saving due to the horizontal inlet structure.

Customized calibration parameter (pressure range, working voltage, output etc.) are available.

DIMENSION (Unit:mm Unspecified Tolerances:±0.1mm)

6863A DIMENSION

ORDER GUIDE

PRESSURE RANGE EXAMPLE

6863A PRESSURE RANGE

More about XGZP6863A, refer to Datasheet or contact CFSensor

XGZP6863A Pressure Sensor V1.0.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.