XGZP6167A Pressure Transmitter

  • Absolute Pressure Type
  • 0~7bar…50bar
  • MEMS piezoresistive principle
  • Isolated mebrance oil-filling structure
  • Radial seal installation method
  • High temperature resistant
  • Various media resistant
  • Low temp.drift
    Excellent stability and linearity
    Constant voltage excite(constant current power supply is customized)
Share on whatsapp
Share on email
Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Description

APPLICATIONS

  • HVAC System
  • Hydraulic/Pneumatic
  • Refrigeration Systems
  • Pumps and Compressor
  • Industrial Process Control and Monitoring
  • Agriculture, Metallurgy, Hydrology, Energy etc,.

 

INTRODUCTION

XGZP6167A Pressure Transmitter is high performance and low cost products.It is structured by Piezo-resistive MEMS silicon sensor as signal sensing element and the customized IC, assort with stainless steel housing and standard pressure port and wire connector.

XGZP6167A Transmitter is integrally temperature compensated and linearity corrected that can meet the requirement of measure and control under general environment. Through strict component making, semi-finished product and all-finished product testing and aging, the transmitter is stable and reliable,having excellent consistency and sensitivity.

XGZP6167A Transmitter provide standard analog output mode(0.5-4.5V or 4-20mA), the OEM service can meet extremely clients application requirement.

DIMENSION (Unit:mm)&DEFINITION

XGZP6167A DIMENSION

 

 

ORDER GUIDE (5VDC Power Supply)

XGZP6167A ORDER GUIDE

 

Datasheet: XGZP6167 Pressure Transmitter V1.1.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

  • The driving current and voltage should be used below the rated value.
  • Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
  • In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
  • Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
  • Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
  • If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.

Start typing to see products you are looking for.

Contact Us