Click to enlarge

XGZP6899A (MPXV7002DP, MPXV5004DP, MPXV5010DP/MP3V5050GP, MPXV5050DP/MP3V5050DP, MPXV5100DP, MPXV4006DP, MPXV7025DP Alternative Parts)

Wide Ranges: -100kPa…-0.5～0～0.5…700kPa(show in Pressure Range Example)
Differential Pressure Type
For Non-corrosive Gas or Air
Optional 5V and 3.3V Voltage
Calibrated Amplified Analog Signal(Refer to XGZP6899D for I2C interface)
Temp. Compensated: 0℃～+60℃(32℉～+140℉)
Direct Application, Low Cost.

Description
SAFETY NOTES & WARRANTY

Description

ESSENTIAL DETAILS

MPXV7002DP vs MPXV5004DP vs MPXV5010DP/MP3V5050GP vs MPXV5050DP/MP3V5050DP vs MPXV5100DP vs MPXV4006DP vs MPXV7025DP vs XGZP6899A Comparison


Manufacturer	CFSensor	NXP	NXP	NXP	NXP	NXP	NXP	NXP
Product Category	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor
Series	XGZP6899A	MPXV7002	MP3V5004	MP3V5010	MP3V5050	MPXV5100	MPXV4006	MPXV7025
Model Number	As Order Guide	MPXV7002DP	MP3V5004DP	MPXV5010DP/ MP3V5050GP	MPXV5050DP /MP3V5050DP	MPXV5100DP	MPXV4006DP	MPXV7025DP
Pressure Range	-100kPa…-0.5kPa～0kPa～0.5kPa…700kPa	-2KPa～2KPa	0KPa～392KPa	0KPa～10KPa	0KPa～50KPa	0KPa～100KPa	0KPa～6KPa	0KPa～25KPa
Pressure Type	Differential	Differential	Differential	Differential	Differential	Absolute	Differential	Differential
Power Supply	5V/3.3V	5V	3V	5V/3V	5V/3V	5V	5V	5V
Output Type	Amplified Analog	Analog	Analog	Analog	Analog	Analog	Analog	Analog
Output	0.5~4.5V/0.2~2.7V	0.5 V ~ 4.5 V	0.6 ~ 1.8V(3kPA)	0.2 ~ 4.7V/0.24 ~ 2.94V	0.2 ~ 4.7V/0.12 ~ 2.8V	0.2 V ~ 4.7 V	0.2 V ~ 4.8 V	0.2 V ~ 4.7V
Accuracy	±2.5%(customizable)	±2.5%	±2.5%	±5%	±2.5%	±2.5%	±5%	±5%
Measured Media	Air or Non-corrosive Gas
Temp. Compensatedp	0℃～+60℃(32℉～+140℉)	10~60°C	10~60°C	-40°C~125°C	-40°C~125°C	0~85°C	10~60°C	10~60°C
Operating Temp	-30~100°C	10~60°C	0~85°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	10~60°C
Package	Plastic Tube	Tray	Tray	Tray	Tray	Tray	Tray	Tray

Notice: Pin definitions vary, refer to datasheet only.

APPLICATIONS

Medical&Healthcare
Industrial&Automation
Domestic Appliance
Consumer Electronic
Automotive Electronic

INTRODUCTION

XGZP6899A is a prefect silicon pressure sensor offering a ratiometric analog interface for reading differential pressure over the specified full scale pressure span and temp.range.

The XGZP6899A incorporates a silicon piezoresistive pressure sensor chip and an interior signal-conditional Application Specific Integrated Circuit(ASIC) in a SOP8 package with two air vents, which can be mounted directly on a standard PCB.

The XGZP6899A is fully calibrated and temperature compensated for offset,sensitivity, temperature and non-linearity, so XGZP6899A pressure sensor satisfy the prefect repeatability,linearity, stability and sensibility, which can be applied directly in medical&healthy, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc.

XGZP6899A pressure sensor is for high volume application at an affordable cost and perfect performance.

Customized calibrations(working voltage,output voltage,and pressure range) are available.

DIMENSION (Unit:mm)

6899A DIMENSION

ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

6899A ORDER GUIDE

PRESSURE RANGE EXAMPLE

6899A PRESSURE RANGE

More about the difference between MPXV7002DP, MPXV5004DP, MPXV5010DP/MP3V5050GP, MPXV5050DP/MP3V5050DP, MPXV5100DP, MPXV4006DP, MPXV7025DP and XGZP6899A, refer to Datasheet or contact CFSensor

XGZP6899A Pressure Sensor V2.8.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.