Low Pressure Transducer XGZP6147

  • Sealed Gage (Positive&Negative) Pressure Type
  • Pressure range ( -100kPa…0kPa…200kP)
  • MEMS Silicon Sensor
  • Smart and Exquisite, High Stability
  • Anti-overload&Shock&Vibration
  • For Non-corrosive gas or air or liquid
  • Easy-to-use, Low Cost
Share on whatsapp
Share on email
Share on facebook
Share on twitter
Share on linkedin
Share on pinterest
Description

APPLICATIONS

  • HVAC System
  • Hydraulic/Pneumatic
  • Refrigeration Systems
  • Pumps and Compressor
  • Industrial Process Control and Monitoring
  • Agriculture, Metallurgy, Hydrology, Energy etc,.

 

INTRODUCTION

XGZP6147 low pressure transducer is high performance and low cost products.It is structured by Piezo-resistive MEMS silicon sensor as signal sensing element and the customized IC,assort with stainless steel housing and packard connector.

XGZP6147 low pressure transducer is integrally temperature compensated and linearity corrected that can meet the requirement of measure and control under general environment. Through strict component making, semi-finished product and all-finished product testing and aging, the transmitter is stable and reliable,having excellent consistency and sensitivity.

XGZP6147 low pressure transducer provide standard analog output mode(0.5-4.5V or 0.2-2.7V or 4-20mA) and pressure interface(G1/4 or by custom), the OEM service can meet extremely clients application requirement.

 

DIMENSION (Unit:mm)

low pressure transducer xgzp6147 dimension

 

LOW PRESSURE TRANSDUCER XGZP6147 ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

low pressure transducer xgzp6147 order guide

Note:
1. Voltage 5Vdc as default value, add 33(or 30) behind model signify 3.3V(or 3.0V) power supply, e.g. : XGZP6147A040KPG33.
2 Custom requirement, please comment herewith Part number(e.g pressure port etc,.) or contact CFSensor.

 

PRESSURE RANGE EXAMPLE

Please consult CFSensor whether required pressure range is under normal production before place order.

low pressure transducer xgzp6147 pressure range example

 

More information about low pressure transducer XGZP6147, refer to Datasheet or contact CFSensor

XGZP6147 Pressure Transmitter V2.1.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

  • The driving current and voltage should be used below the rated value.
  • Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
  • In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
  • Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
  • Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
  • If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.

Start typing to see products you are looking for.

Contact Us

[ninja_form id=1]