Carbon Canister Desorption Pressure Sensor XGZP6186A-00

·Automotive -grade MEMS chips
·Pressure range:10 ~115kPa
·Reverse voltage and overvoltage protection
·High reliability and good stability
·Extensive automotive applications

Description
SAFETY NOTES & WARRANTY

Description

Carbon Canister Desorption Pressure Sensor XGZP6186A-00

Application Areas

XGZP6186A-00 pressure sensor is is a key component in the automotive fuel vapor emission control system (EVAP), primarily used to monitor pressure changes in the carbon canister purge path and transmit signals to the ECU (Engine Control Unit) for precise control.

Overview

The XGZP6186A-00 is a carbon canister purge pressure sensor module developed by CFSensor for the automotive market. This product is manufactured using advanced MEMS technology, featuring a piezoresistive MEMS sensor chip as its core component and a high-performance signal conditioning ASIC chip. Through calibration and compensation, it converts pressure signals into customizable analog voltage output signals (range and output can be tailored) for the ECU to precisely control the opening and closing of the canister purge valve, ensuring efficient fuel vapor recovery and reduced emissions.

This sensor delivers exceptional performance with precise packaging, fast response, high reliability, and excellent stability, making it a cost-effective solution for automotive applications. By accurately regulating fuel vapor recovery, it helps reduce VOC emissions, improve fuel efficiency, and support OBD system leak detection.

Appearance Structure (unit: mm)

Carbon Canister Desorption Pressure Sensor XGZP6186A-00 Appearance Structure

The electric connector BOSCH A928000543 CODE1;
The surface of the metal terminals in the connector is tin-plated according to GB/T 12599;
Insulation resistance: ≥100MΩ (DC500V)
Protection level: IP6K9K
Dimensions without tolerances shall be in accordance with GB/T1804-V
Working medium: fuel steam
For more information, contact the manufacturer

Common Pressure Range

XGZP6186A-00 Common Pressure Range

More information about XGZP6186A-00, refer to Datasheet or contact CFSensor

XGZP6186A-00 EVAP Pressure Sensor (V1.0)_ENG

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.