Click to enlarge

XGZP6867A Pressure Sensor (Fujikura AP2/XFPM Pressure Sensor Alternative)

Wide Ranges: -100…0~25…1000kPa(show in Pressure Range Example)
Gauge Pressure Type (Positive&Vacuum)
For Non-corrosive Gas or Air
Optional 5V, 3.3V or 3.0 Voltage
Calibrated Amplified Analog Voltage Signal
Temp. Compensated: 0℃～+85℃
Affordable Cost, Easy-to-use

Description
SAFETY NOTES & WARRANTY

Description

XGZP6867A Pressure Sensor,(Fujikura AP2/XFPM Pressure Sensor Alternative)

Comparison Category	Parameter	CFSensor XGZP6867A Series	Fujikura AP2 Series	Compatibility / Difference
Basic Info	Product Type	Silicon Piezoresistive Gauge	Silicon Piezoresistive Gauge	Same
	Package	DIP6, Top Port	DIP6, Top Port	Same
	Pressure Media	Non-corrosive gases or air	Non-corrosive gases	Same
Range & Proof	Pressure Range	25, 50, 100, 200, 500, 700, 1000 kPa (Pos)	25, 50, 100, 200, 500, 700, 1000 kPa (Pos)	Same
		0~-50, 0~-100 kPa (Neg)	-50~0, -100~0 kPa (Neg)
		-100~+100 kPa (N+P)	-100~+100 kPa (N+P)
	Overload / Burst	≤100kPa: 2X OL / 3X Burst	Rated by specific range (e.g., 100kPa: 2X OL, 4X Burst)	nearly same
	Overload / Burst	>100kPa: 1.5X OL / 2X Burst	Rated by specific range (e.g., 100kPa: 2X OL, 4X Burst)	nearly same
Electrical (5V)	Supply Voltage	4.75 ~ 5.25 Vdc	5.0 ± 0.25 Vdc
	Output Range	0.2 ~ 4.7 Vdc	0.2 ~ 4.7 Vdc	Same
	Total Accuracy	±1.5 %FSS (0~85℃)	±1.5 %FS (0~85℃)	Same
Electrical (3.3V)	Supply Voltage	3.135 ~ 3.465 Vdc	3.3 ± 0.165 Vdc	Same
	Output Range	0.3 ~ 3.0 Vdc	0.3 ~ 3.0 Vdc	Same
	Total Accuracy	±1.5 %FSS (0~85℃)	±1.5 %FS (0~85℃)	Same
Electrical (3.0V)	Supply Voltage	2.85 ~ 3.15 Vdc	3.0 ± 0.15 Vdc	Same
	Output Range	0.15 ~ 2.85 Vdc	0.15 ~ 2.85 Vdc	Same
	Total Accuracy	±2.0%FSS (0~85℃)	±2.0 %FS (0~85℃)	Same
General Elec.	Operating Current	Typ 1.8mA (Max not specified)	Max 3mA (5V) / 2mA (3.3V & 3.0V)	Similar power consumption
General Elec.	Output Type	Amplified Analog Voltage	Amplified Analog Voltage	Same
Environment	Compensated Temp	0 ~ +85 ℃	0 ~ +85 ℃	Same
	Operating Temp	-30 ~ +105 ℃	-40 ~ +125 ℃	AP2 has wider temp range
	Storage Temp	-40 ~ +125 ℃	-40 ~ +125 ℃	Same
	ESD Protection	±2000 V (HBM)	Not specified
Dynamic & Pin	Response Time	Typ 5 ms (T90)	Typ 1 ms	AP2 is faster
Dynamic & Pin	Pin Definition	1-VSS, 2-OUT, 3-VDD, 4~6-NC	1-VSS, 2-OUT, 3-VDD, 4~6-NC	Same

APPLICATIONS

Medical&Healthcare
Industrial&Automation
Domestic Appliance
Consumer Electronic
Automotive Electronic

INTRODUCTION

XGZP6867A is a perfect silicon pressure sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span.

The XGZP6867A incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a DIP6 package.

The XGZP6867A is fully calibrated and temperature compensated for specified span, so XGZP6867A pressure sensor satisfy the perfect accuracy, which is designed for a wide range of applications in medical care&health, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc by utilizing a microcontroller or microprocessor with A/D inputs.

XGZP6867A pressure sensor is for high volume application at an affordable cost and perfect performance.

Customized calibration parameter (pressure range, working voltage, output etc.) are available.

DIMENSION (Unit:mm Unspecified Tolerances:±0.2mm)

ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

6867A OG 1.0

PRESSURE RANGE EXAMPLE

6867A PRE 1.0

More information about XGZP6867A, refer to Datasheet or contact CFSensor

XGZP6867A Pressure Sensor V1.0.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.