Water Tank Level Sensor XGZP6869A

Wide Ranges: -100kPa…0kPa…200kPa
Optional 5V or 3.3V Power Supply
Gage(Positive&Vacuum) Type
For Non-corrosive Gas or Air or Liquid
Calibrated Amplified Analog Signal(Refer to XGZP6869D for I2C interface)
Temp. Compensated: 0℃～+60℃(32℉～+140℉)
Direct Application,Low Cost

Description
SAFETY NOTES & WARRANTY

XGZP6869A water tank level sensor is for high volume application at an affordable cost but perfect performance. Customized calibrations(working voltage, output voltage, pressure range etc.) are available.

WATER TANK LEVEL SENSOR XGZP6869A ESSENTIAL DETAILS


Manufacturer	CFSensor
Product Category	Pressure Sensor
Series	XGZP6869A
Model Number	As Order Guide
Pressure Range	-100kPa…0kPa…200kPa
Pressure Type	Gauge
Power Supply	5V/3.3V
Output Type	Amplified Analog
Output	0.5~4.5V/0.2~2.7V
Accuracy	±2.5%(customizable)
Measured Media	Air or Non-corrosive Gas or Liquid
Temp. Compensated	0~60°C
Operating Temp	-30~120°C
Package	Plastic Tube or Tape&Reel

APPLICATIONS

Medical&Healthy: e.g. ventilators, CPAP, NPWT, DVT, blood analysis, blood pressure monitoring, drug dosing, hospital beds, oxygen concentrators, patient monitoring, sleep apnea equipment, urine analyzers and wound therapy, breast pumps, massage device etc.
Consumer&Household: e.g. Robot, UAV, wearable device, coffee makers, washing machines, vacuum cleaners, hand dryers, air pump, air beds etc.
Industrial&Automation: e.g. HVAC, flow and liquid level measurement, process control and monitoring, life sciences, pressure switch and meter, IoT and automotive application etc.

INTRODUCTION

Water tank level sensor XGZP6869A is a perfect silicon pressure sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span.

The XGZP6869A water tank level sensor incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a SMT package.

The XGZP6869A water tank level sensor is fully calibrated and temperature compensated for offset, sensitivity, temperature and non-linearity, so XGZP6869A pressure sensor satisfy the prefect repeatability, linearity, stability and sensibility, which can be applied directly in medical&healthy, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc.

DIMENSION (Unit:mm)

water tank level sensor xgzp6869a dimension

ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

water tank level sensor xgzp6869a order guide

Note:
1. Voltage 5Vdc as default value, add 33 behind mode signify 3.3V power supply, e.g. : XGZP6869A040KPGL033.
2. Custom requirement or parameter, please consult CFSensor for custom code(e.g custom pressure range etc,.)

PRESSURE RANGE EXAMPLE

Please consult CFSensor whether required pressure range is under normal production before place order.

Notes:
1. Unit conversion: 1000hPa=1000mbar≈750mmHg≈100kPa≈14.5PSI≈10mH2O≈1bar=0.1MPa;
2. Available for more custom pressure range e.g. 0～3.92kPa,-2～2kPa,0～500kPa etc,.

water tank level sensor xgzp6869a pressure range example

More information about water tank level sensor XGZP6869A, refer to Datasheet or contact CFSensor

XGZP6869A Pressure Sensor V2.6.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.