XGZP6841D Washing Machine Pressure Sensor

Wide Ranges: 0～6kPa(customizable for other range)
3.0V～5.5V Power Supply
Gauge Pressure Type
For Non-corrosive Gas or Air
Calibrated Digital Signal(I2C Interface)(Refer to XGZP6841A for Analog signal)
Temp. Compensated: 0℃～+60℃(32℉～+140℉)
Temperature Measurable
Affordable Cost, Easy-to-use

Description
SAFETY NOTES & WARRANTY

XGZP6841D Washing Machine Pressure Sensor

Manufacturer	CFSensor
Product Category	Pressure Sensor
Series	XGZP6841D
Model Number	As Order Guide
Pressure Range	0～6kPa
Pressure Type	Gauge
Power Supply	3.0V~5.5V
Output Type	I2C interface
Output	21 bit
Accuracy	±2.5%(customizable)
Measured Media	Air or Non-corrosive Gas
Temp. Compensated	0℃～+60℃(32℉～+140℉)
Operating Temp	-30~105°C
Package	Plastic Tube

APPLICATIONS

Washing Machine
Dishwasher
Coffee Machine
Drinking Machine
Other Level or Air Pressure Measurement

INTRODUCTION

XGZP6841D is a perfect silicon pressure sensor offering a ratiometric digital data(I2C interface) for reading differential pressure over the specified full scale pressure span.

The XGZP6841D incorporates a silicon piezoresistive pressure sensor chip and an interior signal-conditional Application Specific Integrated Circuit(ASIC) in a DIP package, which can be mounted directly on a standard PCB.

The XGZP6841D is fully calibrated and temperature compensated for specified span, so XGZP6841D pressure sensor satisfy the perfect accuracy, which is designed for a wide range of application in medical care&health, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc by utilizing a microcontroller or microprocessor with I2C interface.

XGZP6841D pressure sensor is for high volume application at an affordable cost and perfect performance. Customized calibration parameter (e.g.pressure range etc.) are available.

DIMENSION (Unit:mm Unspecified Tolerances:±0.1mm)

XGZP6841D-C Washing Machine Pressure Sensor (ADP51B65 Pressure Sensor Alternative Parts) DIMENSION

ORDER GUIDE

PRESSURE RANGE EXAMPLE

PRESSURE RANGE

More information about XGZP6841D, refer to Datasheet or contact CFSensor

XGZP6841D Pressure Sensor V1.2.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.