Click to enlarge

XGZP6887A Pressure Sensor (MPXV7002GP,MPXV5004GP,MPXV5010GP, MP3V5010GP,MPXV5050GP,MP3V5050GP, MPXV5100GP,MPXV4006GP,MPXV7025GP Pressure Sensor Alternative Parts)

Wide Ranges: -100kPa…0kPa…700kPa(show in Pressure Range Example)
Gauge Pressure Type (Positive&Vacuum)
For Non-corrosive Gas or Air
Optional 5V and 3.3V Voltage
Calibrated Amplified Analog Signal(Refer to XGZP6887D for I2C interface)
Temp. Compensated: 0℃～+60℃(32℉～+140℉)
Horizontal Barbed Inlet

Description
SAFETY NOTES & WARRANTY

Description

XGZP6887A Pressure Sensor (MPXV7002GP,MPXV5004GP,MPXV5010GP,MP3V5010GP,MPXV5050GP,MP3V5050GP,MPXV5100GP,MPXV4006GP,MPXV7025GP Pressure Sensor Alternative Parts)

Manufacturer	CFSensor	NXP	NXP	NXP	NXP	NXP	NXP	NXP
Product Category	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor
Series	XGZP6887A	MPXV7002	MP3V5004	MP3V5010	MP3V5050	MPXV5100	MPXV4006G	MPXV7025
Model Number	As Order Guide	MPXV7002GP	MP3V5004GP	MPXV5010GP /MP3V5010GP	MPXV5050GP /MP3V5050DP	MPXV5100GP	MPXV4006GP	MPXV7025GP
Pressure Range	-100kPa…0kPa…700kPa	-2KPa～2KPa	0KPa～392KPa	0KPa～10KPa	0KPa～50KPa	0KPa～100KPa	0KPa～6KPa	0KPa～25KPa
Pressure Type	Gauge	Compound	Gauge	Gauge	Gauge	Gauge	Gauge	Compound
Power Supply	5V/3.3V	5V	3V	5V/3V	5V/3V	5V
Output Type	Amplified Analog	Analog	Analog	Analog	Analog	Analog	Analog	Analog
Output	0.5 ~ 4.5V/0.2 ~ 2.7V	0.5 V ~ 4.5 V	0 6 ~ 1 8V(3kPA)	0.2 ~ 4.7V/0.24 ~ 2.94	0.2 ~ 4.7V/0.12 ~ 2 .8	0.2 V ~ 4.7 V	0.2 V ~ 4.8 V	0.2 V ~ 4.7 V
Accuracy	±2.5%(customizable)	±5%	±2.5%	±5%	±2.5%	±2.5%	±5%	±5%
Measured Media	Air or Non-corrosive Gas
Temp. Compensated	0℃～+60℃(32℉～+140℉)	10~60°C	10~60°C	-40°C~125°C	-40°C~125°C	0°C~85°C	10~60°C	10~60°C
Operating Temp	-30~100°C	10~60°C	0°C~85°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	10~60°C	10~60°C
Package	Plastic Tube	Tray	Tray	Tray	Tray	Tray	Bulk	Tray

Notice: Pin definitions vary, refer to datasheet only.

APPLICATIONS

Medical&Healthcare
Industrial&Automation
Domestic Appliance
Consumer Electronic
Automotive Electronic

INTRODUCTION

XGZP6887A is a perfect silicon pressure sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span.

The XGZP6887A incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a SMT package.

The XGZP6887A is fully calibrated and temperature compensated for offset, sensitivity, temperature and non-linearity, so XGZP6887A pressure sensor satisfy the prefect repeatability, linearity, stability and sensibility, which can be applied directly in medical&healthy, home appliances, consumer electronic, industry, automotive, loT and other pneumatic devices etc.

XGZP6887A pressure sensor is for high volume application at an affordable cost but perfect performance.

Customized calibrations(working voltage, output voltage, pressure range etc.) are available.

DIMENSION (Unit:mm Unspecified Tolerances:±0.1mm)

XGZP6887A(MPXV7002GP,MPXV5004GP,MPXV5010GP,MP3V5010GP,MPXV5050GP,MP3V5050GP,MPXV5100GP,MPXV4006GP,MPXV7025GP Pressure Sensor Alternative Parts) DIMENSION ORDER GUIDE

6887A ORDER GUIDE

PRESSURE RANGE EXAMPLE

6887A PRESSURE RANGE

More information about XGZP6887A, refer to Datasheet or contact CFSensor

XGZP6887A Pressure Sensor V2.6.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.