Click to enlarge

XGZP192 (MPX2010DP, MPX2050DP, MPX2053DP, MPX2100DP, MPX2200DP, MPX2202DP Alternative Parts)

Range: 0～10/50/100/200kPa
MEMS technology, Solid-state reliability
Barb inlet pipe
Laser trimmed mV output
Temperature compensated
Working temp.: -30℃～+85℃(-22℉～+185℉)
Differential pressure type
Easy to use and embed in OEM equipment

Description
SAFETY NOTES & WARRANTY

Description

ESSENTIAL DETAILS

MPX2010DP vs MPX2050DP vs MPX2053DP vs MPX2100DP vs MPX2200DP vs MPX2202DP vs XGZP192 Comparison


Manufacturer	CFSensor	NXP	NXP	NXP	NXP	NXP	NXP
Product Category	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor	Pressure Sensor
Series	XGZP192	MPX2010	MPX2050	MPX2053	MPX2100	MPX2200	MPX2202
Model Number	As Order Guide	MPX2010DP	MPX2050DP	MPX2053DP	MPX2100DP	MPX2200DP	MPX2202DP
Pressure Range	0～10/50/100/200kPa	0KPa～10KPa	0KPa～50KPa	0KPa～50KPa	0KPa～100KPa	0KPa～200KPa	0KPa～200KPa
Pressure Type	Gauge	Differential	Differential	Differential	Differential	Differential	Differential
Power Supply	10Vdc	1V ~ 16V	1V ~ 16V	1V ~ 16V	1V ~ 16V	1V ~ 16V	1V ~ 16V
Output Type	Non-amplified Analog	Analog	Analog	Analog	Analog	Analog	Analog
Output	mV(millivolt)	0 mV ~ 25 mV (10V)	0 mV ~ 40 mV (10V)	0 mV ~ 40 mV (10V)	0 mV ~ 40 mV (10V)	0 mV ~ 40 mV (10V)	0 mV ~ 40 mV (10V)
Bridge Resistance	5kΩ
Measured Media	Air or Non-corrosive Gas
Temp. Compensated	Yes	Yes	Yes	Yes	Yes	Yes	Yes
Operating Temp	-30℃～+85℃(-22℉～+185℉)	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C	-40°C~125°C
Package	Tray	Tray	Tray	Tray	Tray	Tray	Tray

APPLICATIONS

Medical & Healthcare
Industrial & Automation
Domestic Appliance
Consumer Electronic
Automotive Electronic

INTRODUCTION

XGZP192 is a surface mounting pressure sensor based on CFSensor silicon piezoresistive pressure sensor die. The sensor die is bonded on a substrate with a plastic cap and packaged in a 4-pin housing. The sensor’s zero output, full-scale output, temperature drift and other parameters have been calibrated and compensated by laser trimming. The sensor generates a high-precision standard voltage output signal proportional to the supply voltage.

The small size and high reliability of integration make this sensor a simple and economical choice for high volume application in a variety of industries. With standard PIN interface, XGZP192 is easy for users to install by through-hole mounting.

The XGZP192 pressure sensor is intended for use with non-corrosive gas or air. It is highly prohibited to choke the side of pressure diaphragm during actual application. Please consult us if a pressure medium other then air is to be used.

DIMENSION (Unit:mm Unspecified Tolerances:±0.1mm)

192 DIMENSION

ORDER GUIDE (100kPa=0.1MPa=1bar≈14.5PSI)

192 ORDER GUIDE

More about the difference between MPX2010DP, MPX2050DP, MPX2053DP, MPX2100DP, MPX2200DP, MPX2202DP and XGZP192, refer to Datasheet or contact CFSensor

XGZP192 Pressure Sensor-V1.3.PDF

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.