Click to enlarge

XGZP6832A Pressure Sensor (KP215F1701 Pressure Sensor Alternative Parts)

Wide Ranges: 0kPa～100kPa…700kPa(show in Pressure Range Example)
5Vdc Power Supply
Absolute Pressure Type
For Non-corrosive Gas or Air or Liquid
Calibrated Amplified Analog Signal
Temp. Compensated: -20℃～+85℃
Low Cost, PIN compatible.

Description
SAFETY NOTES & WARRANTY

Description

XGZP6832A Pressure Sensor (KP215F1701 Pressure Sensor Alternative Parts)

Manufacturer	CFSensor
Product Category	Pressure Sensor
Series	XGZP6832A
Model Number	As Order Guide
Pressure Range	0kPa～100kPa…700kPa
Pressure Type	Absolute
Power Supply	5V
Output Type	Amplified Analog
Output	0.4～4.65V
Accuracy	±2.5%(customizable)
Measured Media	Air or Non-corrosive Gas or Liquid
Temp. Compensated	-20℃～+85℃
Operating Temp	-40~125°C
Package	Tape&Reel

APPLICATIONS

Intake pressure measurement
Engine control/manifold absolute pressure (MAP), Oil pressure
Brake booster, LPG and CNG
Water and Liquid level measurement, Industrial controls etc,.

INTRODUCTION

XGZP6832A is a perfect silicon pressure sensor offering a ratiometric analog interface for reading pressure over the specified full scale pressure span.

The XGZP6832A incorporates a silicon piezoresistive pressure sensor die and an interior Application Specific Integrated Circuit(ASIC) in a SMT package.

The XGZP6832A is fully calibrated and temperature compensated for specified span, so XGZP6832A pressure sensor satisfy the perfect accuracry, which is designed for a wide range of application in automotive, medical care&health, home appliances, consumer electronic, industry, loT and other pneumatic devices etc by utilizing a microcontroller or microprocessor with A/D inputs.

XGZP6832A pressure sensor is for high volume application at an affordable cost but perfect performance.

Customized calibrations(working voltage, output voltage, pressure range etc.) are available.

DIMENSION (Unit:mm Unspecified Tolerances:±0.1mm)

XGZP6832A (KP215F1701 Pressure Sensor Alternative Parts) DIMENSION

ORDER GUIDE

6832A ORDER GUIGE

PRESSURE RANGE EXAMPLE

6832A PRESSURE RANGE.

More information about XGZP6832A, refer to Datasheet or contact CFSensor

XGZP6832A Pressure Sensor V1.5

SAFETY NOTES & WARRANTY

SAFETY NOTES

Using these sensors products may malfunction due to external interference and surges, therefore, please confirm the performance and quality in actual use. Just in case, please make a safety design on the device (fuse, circuit breaker, such as the installation of protection circuits, multiple devices, etc.), so it would not harm life, body, property, etc even a malfunction occurs. To prevent injuries and accidents, please be sure to observe the following items:

The driving current and voltage should be used below the rated value.
Please follow the terminal connection diagram for wiring. Especially for the reverse connection of the power supply, it will cause an accident due to circuit damage such as heat, smoke, fire, etc.
In order to ensure safety, especially for important uses, please be sure to consider double safety circuit configuration.
Do not apply pressure above the maximum applied pressure. In addition, please be careful not to mix foreign matter into the pressure medium. Otherwise, the sensor will be discarded, or the media will blew out and cause an accident.
Be careful when fixing the product and connecting the pressure inlet. Otherwise, accidents may occur due to sensor scattering and the blowing out of the media.
If the sensor come with sharp PIN, please be careful not to hurt your body when using it.

WARRANTY

The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. CFSensor reserves the right to make changes without further notice to any product herein.

CFSensor makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does CFSensor assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications. All operating parameters must be validated for each customer application by customer’s technical experts. CFSensor does not convey any license under its patent rights nor the rights of others.